Prop 65 Warning


Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

View By Supplier

    Featured Brands

Product Detail

Show Larger Photo

Part #LNCK2382-4

  • CC Rated Output Current/Voltage/Duty Cycle
    • AC Contstant Current: 250A/25V/100%
    • DC Constant Current: 250A/25V/100%
    • Current Ranges: 160-250A, 110-180A, 70-130A, 50-80A
    • Max OCV @ 3700 RPM 80V RMS
  • CV-Rated Output Current/Voltage/Duty Cycle
    • DC Constant Voltage: 250A/25V/100%
    • 14-22V
    • 18-28V
  • Generator AC Power
    • 11,000 Watts Peak
    • 10,000 Watts Continuous 60Hz Single Phase
    • Two 120V Duplex Receptacles (20A per Duplex, 40A Total)
    • 120/240V Receptacle (42A Each 120V Branch 42A @ 240V)
  • Dimensions (H x W x L inches)
    • 29.9 x 21.5 x 42.3
      • To top of exhaust tube: 36.2
  • Weight
    • 602 lbs
Manufacturer: Lincoln Electric
with Electronic Fuel Pump
Price: $4,687.00 Each
Spec Sheet
Truck or Mfg. Direct Ship Only

Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.

Special Features:

  • Totally Enclosed Case
    • Engine is fully protected
    • 3 service doors
    • Low Noise - 76.4 dBA sound level at 23 ft. 100.7 dB sound power at rated output
  • Versatile AC/DC Welding
    • AC/DC welding output for a broad range of stick electrode types
    • Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol for aluminum and other alloy welding
    • MIG and flux-cored capable (with optional equipment)
    • Remote ready! 6-pin connector and local/remote switch for remote control operation
  • 11,000 Watts Peak Single-Phase AC Generator Power
    • Peak for motor starting
    • 10,000 watts continuous power for generator, plasma cutter or inverter welder
    • Lights, grinder, power tools
  • 23 HP Kohler Gasoline Engine
    • 2 cylinder, 4 cycle overhead valve air-cooled design
    • Electric fuel pump avoids vapor lock
    • Oil drain extension for easy oil changes
    • 12 gallon gas tank for extended run times
    • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling
  • Rugged Reliability
    • Welding and AC generator outputs rated at 104F.